What's the Filtering Mechanism of Filter Press
Sino filter press has stable performance, convenient operation, safety and saving power. The metal drum is made of seamless steel tube and plastic strainer. It is high temperature, high pressure and durable. Now let's recognize the filtering mechanism of a filter press.
Installation and debugging
1. The filter press should be installed on flat concrete. The foot of the feed end is fixed on the base; The support ends without the anchor bolt, or the anchor bolt is positioned with two nuts, the nut gasket is properly spaced between the holder and the foot can be retractable. Before positioning the installation personnel should correct the vertical degree of the horizontal surface of the beam and the thrust plate.
2. The structure of the foundation shall be designed by the construction engineers according to the load condition of the equipment, and the anchor bolts shall be filled twice with the reserved holes.
3. There should be sufficient operation and maintenance space around the filter press, and the hydraulic pressure filter should select the appropriate position to place the hydraulic station to ensure the hydraulic station can work properly.
4. Press the filter plate according to work requirement, and arrange the feeding, washing and drainage pipeline. Equipped with a filter pressure display table and a reflux channel that controls filter pressure. If the diaphragm is squeezed, the compressed air line is arranged.
5, hydraulic filter press, hydraulic station infuse cleaner fuel tank # 20-40 # hydraulic machine oil, using temperature > - 5 ℃; If environment temperature is low, can choose similar viscosity, low freezing point hydraulic oil. The hydraulic oil must be added by 80-100 mesh filter.
6. Mechanical or hydraulic pressure tightening device, connect the power starting motor to work correctly. Hydraulic clamping pressure gauge should be rising steadily, hydraulic system no discharge phenomenon, according to the model size correctly adjust the working pressure of the hydraulic pressure station, after commissioning if found insufficient oil storage tank should be added.